Features
- Compact cabinet with bass reflex technology
- 18”high output woofer
- Very high SPL
- Build-in flying hardware
- Baltic birch plywood by coating waterborne anti-scratch paint
- Strong mortise joint technology
Description
VLA-208SUB is a flat sub-woofer speaker with bass reflex technology. By using computer to pre-calculated and analysis cabinet resonance and then improve structure to reduce related resonance. Finally the bass tone will be clean and efficiency without any resonant noise. Optimize chamber designing is also reduced more dimen- sion. The long stroke woofer speaker combines with advanced DSP control technology to efficient control over load and distortion and bottoming noise during high power range. By recall the preset from DSP unit and simple tuning, the VLA-208SUB could be combining with VLA-208 line array system . The durable cabinet was made by Baltic birth plywood and mortise joint technol- ogy.
It offers transported handle on both side and reserved screw holes for wheels on back side for easy moving and trans- portation. The coating is made by waterborne anti-scratch paint to achieve strong, reliability and environ- mental. VLA-208SUB can perform unbelievable 28Hz to 2KHz frequency responsible and 99 dB(1m/1W) sensi- tivity, 135 dB max. SPL. Therefore, it will be applying to a mid-size multipur- pose venue.
Normally VLA-208SUB could be flying or standing on floor with VLA-208 by unique “Frame” flying hardware. There- fore, it will be satisfied with several applications such as conference room, church, outdoor, theater and auditori- um, night club and so on.
Applications
VLA-208SUB is an assorted sub-woof- er with compact size but high power output. It could get very close combina- tion with VLA-208 full range cabinet. The cuboid body and precision inverted hole make the bass more strong, rich and powerful.
Apply to:
Touring system Lecture hall Bar
Mid/small theater and auditorium Music hall
Night club, KTV Social club Church
Technical Specifications
Physical Parameters | |
Components | 1 x 18″ Neodymium woofer driver |
Operating Type | Sub-Woofer cabinet driven by ext. amplifier |
Profile | Cuboid |
Cabinet | Baltic birch plywood, tongue and groove joint |
Surface | Waterborne anti-scratch paint |
Connector | 2 x NL4 Speakon |
Flying System | VLA-208 Vertical line array system |
Dimension | 500mm×636mm×735mm(H×W×D) |
Weight | 48kg |
Nominal Parameters | |
Frequency Responsible | 35Hz~500Hz (±3dB) 28Hz~2KHz (-10dB) |
Sensitivity(1m/1W) | 99dB |
Nominal Impedance | 8Ω |
Rated Power(AES) | Continue: 1000W Program: 2000W Peak: 4000W |
Maximum SPL(1m) | 135dB |
Nominal Coverage Angel(-6dB) | N/A |
Dimension and diagram
Unit : mm