VLA-132 is a self-powered subwoofer special designed for club and EDM concert. It completely subverts the traditional working mode of moving coil units. The continuous power handling reaches 7500W and the peak sound pressure output reaches an unbelievable 149dB. The clean, clear, and non-stained bass will break your past experience, and you will even need to re-adapt to this “non-smog” tone.
Different from the traditional dynamic working mode of the woofer, V L A-132 uses the Italian P o w e r s o f t M-Force linear motor drive technology to drive the ultra-large and high-strength diaphragm to achieve strong and deep bass output.
The VLA-132 adopts a direct radiation phase-inverted design, uses a computer to predict and analyze the cabinet resonance, and uses a steel reinforced structure to reduce these resonances, so that the bass appears clean and there is no cabinet sound. The optimized cavity design makes the speaker volume more compact.
The box body adopts high-strength 24mm “Baltic Birch plywood”, tongue and groove joint technology, the box body is strong and durable.
The two sides of the speaker are designed with carrying handles, and the bottom of the speaker is reserved with a screw hole for the installation of pulleys, which is convenient for carrying and moving. The surface treatment adopts multi-layer environmentally friendly water-based paint, which is strong, durable and environmentally friendly. In order to facilitate outdoor use and improve transportation, a specially customized rain protection cover can be provided.
The VLA-132 cabinet structure is also designed with stacked anti-skid grooves, which form a tongue-and-groove joint with the convex support column at the bottom of the cabinet which is simple and stable, ensuring that the box will not slide and fall when providing strong energy output. VLA-132 can reach a frequency response range of 25Hz~120Hz, and the maximum sound pressure output can reach 149dB which can provide strong enough bass energy for outdoor EDM dance parties.
*The rain protection cover needs to be purchased separately.
| Physical Parameters | |
| Components | 1×32” M-Force linear motor driver |
| Type | Bass reflex/Band pass |
| Power supply | Universal, regulated switch mode with PFC |
| Supply voltage | 90~260VAC; 50/60Hz |
| Shape | Cuboid |
| Cabinet | 15/18mm Baltic birch plywood |
| Surface | Water-based environmentally friendly spray paint |
| Power connector | PowerCon TRUE-1 |
| Dimension | 812mm x 812mm x 1206mm (H x W x D) |
| Weight | 95kg |
| Nominal Parameters | |
| Frequency Responsible | 25-120Hz through DSP control 20-150Hz nominal |
| Signal connector | Female XLR in/ Male XLR link/Female XLR AES3 in |
| Nominal loading impedance | 2 ohms |
| Linear motor power output | 7500W (Continue)/ 15000W (Peak) |
| Peak output SPL | 146dB through DSP/ 149dB nominal |
| Amplifier mode | Class-D |
| Transducer control technology | Virtual Transducer® |
Unit : mm
FEATURED COMBO