MS-15C – Enewave

Overview

This is a coaxial designed multi-purpose cabinet with in a. Its multifunctional design makes it an all-round speaker. Combining high output and natural sound classic reproduction, it is suitable for various portable and permanent installation applications. The asymmetrical shell design provides the typical angle required, which is suitable for wall installation and stage monitoring. For permanent fixed installation, outside the box

The shell provides multiple 10mm hanging points, and a standard bracket jack is provided at the bottom of the speaker, which is more convenient and portable. M S-1 5 C is ENEWAVE’s top high-performance multi-purpose speaker. The coaxial output design makes its cabinet design more compact and lighter.

Features

Compact design to meet all sound reinforcement application needs
Two ways cabinet combines high frequency compression driver and cone woofer
Powerful output capacity
Asymmetric polygonal design provides a variety of installation angles
Built-in bracket mounting holes and 10mm hanging points
Built-in passive crossover networked to provide the most economical driving method

Description

MS-15C is a full range coaxial speaker composed of a 15-inch cone low-frequency unit and a 3-inch voice coil high-frequency compression driver. It built-in a passive crossover network which can be driven by a single channel of power amplifier. The enclosure is made of high-strength “Baltic birch plywood” with tongue and groove joint technology. The surface adopts multi-layer environmentally friendly water-based paint, which is strong, durable and environmentally friendly. The overall compact enclosure design is small and exquisite. Extreme and high-power loud speaker unit can be provided pretty strong sound pressure even in a compact enclosure. The sensitivity is 99dB, and the maximum output is 132dB.

There are high-strength 10mm hanging points with a depth of 25mm on multiple surfaces of the speaker which can be installed with lifting rings to meet variable hanging needs. At the bottom of the cabinet built-in a 1 3/8” socket for inserting general speaker stand. The input connector included 2 of Neutrik NL4 speaKON. MS-15C is particularly suitable as a near-field main speaker or complement, delay system for F.O.H. system. It’s 60-degree dispersion angle can easily cover a wide area. With SW and AS subwoofer series products, different application requirements such as small stage performances, small theaters, bars, and mobile performance systems can be completed.

Applications

Mobile sound reinforcement system
Special sound effects for theme park attraction
Lecture Hall
bar & club
church
Small theater

Technical Specifications

Physical Parameters
Components	15 woofer with water-proof coating 3” High frequency compression driver with 1.4” throat
Cabinet principle	2 ways cabinet with passive network
Driven mode	Passive and driven by external amplifier
Cabinet shape	Multilateral Cuboid
Cabinet material	Baltic birch plywood/span>
Surface	Environmentally friendly water-based paint
Connector	2x NL4 speaKON
Install accessories	10 mm bolt hanging point, flight buckles &1 3/8” socket at the bottom
Recommend sub-woofer	SW-118II or SW-218II
Dimension	580mm x 447mm x 395mm (H x W x D)
Weight	24.95kg
Nominal Parameters
Frequency Responsible	50Hz-17KHz (+/-3dB) 43Hz-20KHz (-10dB)/span>
Sensitivity (@1Watt/1m)	99dB
Nominal impedance	8 ohms
Power capacity (AES)	Continue 500w Program 1000w Peak 2000w
Maximum SPL (1m/calculated)	132dB
Vertical dispersion angle (-6dB)	60∘
Horizontal dispersion angle (-6dB)	60∘

Dimension and diagram

Unit : mm